Tight Head Drum MD 60 S
Drums can be supplied with handles welded on the drum lid. Protection of the external surface is ensured with environment-friendly water based paint that meets all legislative requirements.
Drums can be delivered uncoated, with external coating in one or more colours, internally coated or they can be manufactured from double-side hot-dip galvanized steel sheets.
General Description
- All drum types can be supplied with a silk screen printed customer’s logo.
- Drums with raw surface of the interior are suitable for packaging products that do not react with steel.
- Steel drums production complies with strict UN regulations for packing dangerous goods in the packaging groups I/X, II/Y, III/Z.
Standard Specification
Steel Sheets
Construction
Body seam: Continuous resistance weld.
Classification according to the type of transport
In compliance with the valid legislation and legislative executive regulations are drums of the Greif company production tested in accordance with the UN recommendations specified in Transports of dangerous goods – Model regulations and the sections of the International Collection for Transportation Chains as RID/ADR/I MDG – Code/ICAO – IATA /ADN.
Bottom/lid to body seaming
The seam is done with a safety double seaming Spiralon®.
Closures
The drums can be supplied with a combination of Tri-Sure® 4S® G2" and G3/4" closures in the lid. Screw closures comply with the international standards of EN ISO 15750-3. Closures can be closed and sealed with Tab-Seal® caps in neutral or customer design. Closure flanges have standard sealing with a high-resistance system of 4S® sealing rings.
Stacking
UN Code marking
The UN code is embossed on the drum bottom and printed on the lower part of the drum body in accordance with international regulations.
Legislation
The products of Greif Czech Republic a.s. are supplied in accordance with the valid legislation.
